Email   Password


ASHRAE Membership

ASHRAE membership is open to any person associated with heating, ventilation, air conditioning or refrigeration. ASHRAE is unique because its membership is drawn from a wide range of disciplines relating to the HVAC&R field. Over 55,000 individuals from more than 100 nations belong to the Society.

Discounts on Publications

ASHRAE members earn 15% off publications. Hundreds of titles are available including the complete collection of ASHRAE Standards including 90.1, 62.1 and 189.1.
Click here for information on joining or to join ASHRAE

Develop Leadership Skills

When you join ASHRAE, you are making an investment in yourself. When you become active in the Society by giving your time and sharing your knowledge, you get even more out of that investment.

Network with Industry Professionals

Each month, all over the world, ASHRAE chapters convene for an informational program featuring a speaker or topic that is key to professionals in the industry. Meet with your peers and share ideas.
Need technical info? Search ASHRAE's Bookstore >

ASHRAE Announces Recipients of Student Design Competition; Applied Engineering Challenge

Nov 17, 2015

Contact: Jodi Scott
Public Relations

ATLANTA – Heat – whether in designing a building in Qatar or a temporary structure for heat illness victims – was the focus of two ASHRAE competitions challenging students in their engineering skills.

The 2015 Design Competition focused on a three-story classroom and office building in Doha, Qatar, while for the Applied Engineering Challenge, students were required to design a collapsible portable conditioned shelter for treatment of heat illness victims. Thirty-nine teams representing 10 countries entered the events.

First place recipients in the HVAC System Selection are from the University of Nebraska-Lincoln. Team members are Brianna Brass, currently seeking a Master’s of Architectural Engineering degree, University of Nebraska-Lincoln; Matthew Easlon, Feinschule Hagwon, Gwangju, Korea; Mary Kleinsasser, currently seeking a Master’s of Architectural Engineering degree, University of Nebraska-Lincoln; Ben MacKenzie, mechanical engineering intern, Affiliated Engineers, Madison, Wis.; and Rachel Obenland, currently seeking a Master’s of Architectural Engineering degree, University of Nebraska-Lincoln. The faculty advisor is David P. Yuill, Ph.D., P.E., while industry advisors are Joe Hazel, P.E., HFDP, Specialized Engineering Solutions, Omaha, Neb., and Dan Karnes, Leo A. Daly, Omaha, Neb.

After comparing HVAC system options, the team chose a water source heat pump system utilizing a closed seawater loop field. The system had the lowest life cycle cost of the three systems considered. The seawater loop field provides a sustainable energy source with a low environment impact. Comfort and indoor environmental quality are easily maintained due to the adjustability of the system within the building.

The system showed a 44 percent energy improvement over the baseline. It is projected to cost $3.8 million over a 50 year period, which is $695,000 less than a variable air volume air handling system with thermal ice storage option and $220,600 less than fan coil units with a dedicated outside air system and thermal ice storage option.

First place recipients in the HVAC Design Calculations also are from the University of Nebraska-Lincoln. Team members are Kristin Hanna, currently seeking a Master’s of Architectural Engineering degree, University of Nebraska-Lincoln; Garrett Johnson; Mark Wilder, mechanical intern, M.E. Group, Omaha, Neb. The faculty advisor is David Yuill, Ph.D., P.E.

To address the peak cooling load of 157 tons, students designed a thermal ice storage system, which allows the chiller size to be reduced to 100 tons while still meeting load. Although the ice storage system adds initial cost, it is shown to reduce life cycle cost because of the reduction in initial cost for the chiller and reduction of energy used during peak demand hours throughout the cooling season.

The team also designed a creative condenser water heat rejection approach, using several decorative fountains on the school grounds. The approach is unusual but has been implemented in the Museum of Islamic Art in Doha. Heat and mass transfer calculations show that a total of 240 square meters of fountains will be required.  

First place in the category of Integrated Sustainable Building Design goes to a team from Portland State University. Team members are Krestina Aziz, architectural designer, Otak, Portland, Ore.; Adam Buchholz, estimator, Johnson Air Products, Portland, Ore.; Nicole Dunbar, mechanical designer, Mazzetti Inc., Portland, Ore.; Lee H. Han, mechanical engineer, PAE Consulting Engineers, Seattle, Wash.; Joel Joiner, project manager, Hydro-Temp Mechanical, Wilsonville, Ore.; Osman Sarper Kucuk; Blake Reynolds, mechanical designer, Interface Engineering, Portland, Ore.; Natalie Sherwood, mechanical designer, Interface Engineering, Portland, Ore.; Huy Tran, CLEARRresult, Portland, Ore.; and Alex Wilson, graduate student, Portland State University.  The faculty advisor is Huafen Hu, Ph.D.

The team worked to integrate site location, building orientation, envelope components and mechanical systems to achieve a building approaching net zero energy. The building site was chosen on the basis of wind direction, public transportation and proximity to the Persian Gulf to take advantage of any naturally cooled air. For mechanical system design, they chose a combination or radiant beams with a dedicated outdoor air system, energy recovery ventilators and thermal storage.

Low flow plumbing was selected to reduce the building’s reliance on the energy intensive desalinated water available in Doha.  Shading and orientation also played an important role due to the high solar gain the region. Solar generation was chosen for a source of renewable energy.

For the Applied Engineering Challenge, students were required to design a collapsible portable conditioned shelter that can be assembled in the field to assist in the treatment of a victim of heat illness, including heat exhaustion and heat stroke.

The first place Applied Engineering Challenge recipients are from California Polytechnic State University, San Luis Obispo: Miren Aizpitarte, project engineer, Critchfield Mechanical Inc., San Jose, Calif.; Cinthya Mendez, mechanical engineer, Western Allied Mechanical, Menlo Park, Calif.;  Julia Stone, mechanical facilities engineer, Intel, Chandler, Ariz.; and Willis Tang, design engineer, ACCO Engineered Systems, Glendale, Calif. Their faculty advisor is Jesse Maddren, Ph.D., P.E.

The team chose a pentagonal structure with an airbed and chilled pad inside. The structure was cooled by a portable air-conditioning unit with an evaporative cooling option for dry climates. The tent walls, doors and roof are thinly insulated, and also feature air gaps and layers of nylon shading material. There also is a clear plastic observation window.

The portable, conditioned structure will effectively treat victims of heat exhaustion, heat cramps and heat rash on job sites. Design criteria were developed to ensure that construction workers, who are the target audience, would be comfortable in the structure for an extended period of time.

The projects will be shared at the 2016 ASHRAE Winter Conference, Jan. 23-27, Orlando Hilton, Orlando, Fla. Also taking place at that time is the ASHRAE co-sponsored AHR Expo, Jan. 25-27, Orange County Convention Center, Orlando.

ASHRAE, founded in 1894, is a global society advancing human well-being through sustainable technology for the built environment. The Society and its more than 50,000 members worldwide focus on building systems, energy efficiency, indoor air quality, refrigeration and sustainability. Through research, standards writing, publishing, certification and continuing education, ASHRAE shapes tomorrow’s built environment today. More information can be found at www.ashrae.org/news.