Artificial intelligence (AI) policy: ASHRAE prohibits the entry of content from any ASHRAE publication or related ASHRAE intellectual property (IP) into any AI tool, including but not limited to ChatGPT. Additionally, creating derivative works of ASHRAE IP using AI is also prohibited without express written permission from ASHRAE.

Close
logoShaping Tomorrow’s Global Built Environment Today

Interpretations For Standard 90.1-2001

Share This

NOTE: All documents linked from this page are in pdf_icon.png PDF-format.

pdf_icon.png Interpretation 90.1-2001-1 - April 22, 2002 (Ref. Section 4.1.2.1, Additions to Existing Buildings, and 4.1.2.2, Alterations to Existing Buildings)

pdf_icon.png Interpretation 90.1-2001-2 April 22, 2002 (Ref. water heater requirements in Section 7.2.2 and Table 7.2.2)

pdf_icon.png Interpretation 90.1-2001-3 - April 22, 2002 (Ref. requirements in Section 11.4.2(c) relating to budget building envelope model glazing characteristics)

pdf_icon.png Interpretation 90.1-2001-4 - April 22, 2002 (Ref. subsections 11.4.3(a) and (d) in combination with Subsection 6.3.6.1)

pdf_icon.png Interpretation 90.1-2001-5 - April 22, 2002 (Ref. requirements in Section 9.3.2 relating to the exterior lighting power allowance)

pdf_icon.png Interpretation 90.1-2001-6 - April 22, 2002 (Ref. requirements in Section 5.5.3.4, Vestibules)

pdf_icon.png Interpretation 90.1-2001-7 - June 23, 2002 (Ref. Section 6.3.6.1, Exhaust Air Energy Recovery)

pdf_icon.png Interpretation 90.1-2001-8 - January 25, 2004 (Ref. Section 9.3.1.2, relating to interior lighting power allowance)

pdf_icon.png  Interpretation 90.1-2001-9 - January 26, 2003 (Ref. Section 6.3.1 Economizers, specifically Exception 6.3.1i relating to the cooling efficiency and the efficiency requirements in Table 6.1.3.)

pdf_icon.png  Interpretation 90.1-2001-10 - January 25, 2004 (Ref. to the requirements presented in ANSI/ASHRAE/IESNA Standard 90.1-2001, Section 6.2.3.3.4 and in the accompanying Table 6.2.3.3.4 'Maximum Damper Leakage'.)

pdf_icon.png Interpretation 90.1-2001-11 - January 25, 2004 (Ref. refers to the requirements presented in ANSI/ASHRAE/IESNA Standard 90.1-2001, Section 6.3.3.1 Fan Power Limitation, and Table 6.3.3.1, specifically relating to fan power limitation ratios.)

pdf_icon.png Interpretation 90.1-2001-12 - January 25, 2004 (Ref. to the requirements presented in ANSI/ASHRAE/IESNA Standard 90.1-2001, Section 5 Building Envelope, specifically Sections 5.1.4, 5.2.1, 5.3.1d, 5.3.1.4 and Figure 5.3 relating to floor insulation.)

pdf_icon.png  Interpretation 90.1-2001-13 - February 7, 2005 (Ref. to the requirements presented in ANSI/ASHRAE/IESNA Standard 90.1-2001, Section 6.3.3.1 and Table 6.3.3.1 Fan Power Limitation)

pdf_icon.png Interpretation 90.1-2001-14 - February 7, 2005 (Ref. to the requirements presented in ANSI/ASHRAE/IESNA Standard 90.1-2001, Section 6.2.1, related to mechanical equipment efficiency and certification.)

pdf_icon.png Interpretation 90.1-2001-15 - February 7, 2005 (Ref. to the requirements presented in ANSI/ASHRAE/IESNA Standard 90.1-2001, Section 6.3.3.1, related to Fan Power Limitation for Laboratory Systems.)

pdf_icon.png Interpretation 90.1-2001-16 - February 7, 2005 (Ref. to the requirements presented in ANSI/ASHRAE/IESNA Standard 90.1-2001, Section 7 Service Water Heating, specifically Section 7.2.6 relating to heat traps serving storage water heaters and storage tanks.)

pdf_icon.png Interpretation 90.1-2001-17 - June 22, 2008 (Refers to the requirements presented in ANSI/ASHRAE/IESNA Standard 90.1-2001, Section 9.3.1.2(c), relating to selection of a space type and the resulting lighting power allowance when using the Space-by-Space Method)

Close