Artificial intelligence (AI) policy: ASHRAE prohibits the entry of content from any ASHRAE publication or related ASHRAE intellectual property (IP) into any AI tool, including but not limited to ChatGPT. Additionally, creating derivative works of ASHRAE IP using AI is also prohibited without express written permission from ASHRAE.

Close
logoShaping Tomorrow's Built Environment Today

Interpretations For Standard 90.1-2013

Share This

NOTE: All documents linked from this page are in pdf_icon.png PDF-format.

pdf_icon.png Interpretation 90.1-2013-1 – October 18, 2013 (Refers to the requirements presented in ANSI/ASHRAE/IES Standard 90.1-2013, Section 5.5.4.6, Exception 5, relating to a definition for side lighting effective aperture.)

pdf_icon.png Interpretation 90.1-2013-2 – October 17, 2014 (Refers to the requirements presented in ANSI/ASHRAE/IES Standard 90.1-2013, Sections G3.1.2.1 and G3.1.2.10 and Tables 6.8.1-2 through 6.8.1-4, relating to baseline fan power used to determine minimum efficiency EER, SEER, COP, and HSPF.)

pdf_icon.png Interpretation 90.1-2013-3 – October 18, 2014 (Refers to the requirements presented in ANSI/ASHRAE/IES Standard 90.1-2013, Section 8.4.2, relating to automatic receptacle control.)

pdf_icon.png Interpretation 90.1-2013-4 – January 24, 2015 (Refers to the requirements presented in ANSI/ASHRAE/IES Standard 90.1-2013, Sections 6.5.3.2.1 and 6.5.3.5, relating to fan airflow control and fractional horsepower motors.)

pdf_icon.png Interpretation 90.1-2013-5 – April 18, 2015 (Refers to the requirements presented in ANSI/ASHRAE/IES Standard 90.1-2013, Section 6.5.4.6, relating to pipe sizing for district energy systems.)

pdf_icon.png Interpretation 90.1-2013-6 – October 24, 2015 (Refers to the requirements presented in ANSI/ASHRAE/IES Standard 90.1-2013, Section 6.5.2.1, relating to maximum allowable reheat percentage.)

Interpretation 90.1-2013-7 – October 24, 2015 (Refers to the requirements presented in ANSI/ASHRAE/IES Standard 90.1-2013, Section 6.5.2.1, relating to applicability at minimum outside air damper position.)

pdf_icon.png Interpretation 90.1-2013-8 – March 11, 2016 (Refers to the requirements presented in ANSI/ASHRAE/IES Standard 90.1-2013, Section 9.4.2 and Table 9.4.2-2, relating to exterior building lighting power and building facades.)

pdf_icon.png Interpretation 90.1-2013-9 – March 11, 2016 (Refers to the requirements presented in ANSI/ASHRAE/IES Standard 90.1-2013, Section 9.1.2, relating to lighting alterations.)

pdf_icon.png Interpretation 90.1-2013-10 – June 27, 2016 (Refers to the requirements presented in ANSI/ASHRAE/IES Standard 90.1-2013, Section 6.4.3.4 relating to motorized dampers and damper leakage.)

pdf_icon.png Interpretation 90.1-2013-11 – January 29, 2017 (Refers to the requirements presented in ANSI/ASHRAE/IES Standard 90.1-2013, Section 6.5.3.1.2, relating to motor nameplate horsepower.)

pdf_icon.png  Interpretation 90.1-2013-12 – January 29, 2017 (Refers to the requirements presented in ANSI/ASHRAE/IES Standard 90.1-2013, Section 6.4.3.1.2, relating to dead band zone thermostat controls.)

pdf_icon.png Interpretation 90.1-2013-13 – June 25, 2017 (Refers to the requirements presented in ANSI/ASHRAE/IES Standard 90.1-2013, Sections 6.5.3.1.1 and 6.5.3.1.2, regarding Nameplate Motor Horsepower requirements when no nameplate Motor Power is available on the motor.)

pdf_icon.png Interpretation 90.1-2013-14 – October 21, 2017 (Refers to the requirements presented in ANSI/ASHRAE/IES Standard 90.1-2013, Section 6.4.4.2.1, regarding duct sealing)

pdf_icon.png Interpretation 90.1-2013-15 – October 21, 2017 (Refers to the requirements presented in ANSI/ASHRAE/IES Standard 90.1-2013, Sections 6.5.3.1.3, regarding fan efficiency.)

pdf_icon.png Interpretation 90.1-2013-16 – January 21, 2018 (Refers to the requirements presented in ANSI/ASHRAE/IES Standard 90.1-2013, Section 11.4.3.2 and Table 11.5.1, regarding energy modeling cogeneration systems.)

pdf_icon.png Interpretation 90.1-2013-17 – April 7, 2018 (Refers to the requirements presented in ANSI/ASHRAE/IES Standard 90.1-2013, Sections 6.5.3.1.3, regarding fan efficiency.)

pdf_icon.png Interpretation 90.1-2013-18 – October 12, 2019 (Refers to the requirements presented in ANSI/ASHRAE/IES Standard 90.1-2013, Sections 9.4.1.1 and 9.6.1, regarding controls for spaces broken up into smaller subspaces.)

pdf_icon.png Interpretation 90.1-2013-19 – October 12, 2019 (Refers to the requirements presented in ANSI/ASHRAE/IES Standard 90.1-2013, Sections 8.1.4 and 8.4.2, regarding application of automatic receptacle control to alterations.)

pdf_icon.png Interpretation 90.1-2013-20 – October 16, 2020 (Refers to the requirements presented in ANSI/ASHRAE/IES Standard 90.1-2013, Section 5.4.3.4 Exception 6, regarding entrance vestibules.)

pdf_icon.png Interpretation 90.1-2013-21 – March 24, 2021 (Refers to the requirements presented in ANSI/ASHRAE/IES Standard 90.1-2013, Section 8.4.2 and Table 9.6.1, regarding automatic receptacle control at workstations in spaces otherwise not required to be furnished with occupancy sensors under ASHRAE/IES 90.1.)

pdf_icon.png Interpretation 90.1-2013-22 – March 24, 2021 (Refers to the requirements presented in ANSI/ASHRAE/IES Standard 90.1-2013, Sections 5.5.4.3 and 5.8.2.3, regarding U-factor of the fenestration for the actual fenestration size versus standard reference size per NFRC 100.)

pdf_icon.png Interpretation 90.1-2013-23 – June 24, 2023 (Refers to the requirements presented in ANSI/ASHRAE/IES Standard 90.1-2013, Section 8.4.3.1, regarding monitoring of electrical energy types not falling under the categories encompassed by items (b) through (e).)

pdf_icon.png Interpretation 90.1-2013-24 – June 24, 2023 (Refers to the requirements presented in ANSI/ASHRAE/IES Standard 90.1-2013, Sections 3, 9.4.1.1 and 9.6.1, regarding automatic daylighting control implications of subspaces of the same space type (but with independent functions) within a larger, uninterrupted space.)

Close